ipMIDI 1.5

ipMIDI MIDI over Ethernet ports - send MIDI over your LAN. You can route MIDI over your Ethernet network, using ipMIDI ports to send and receive MIDI centrally located PCs connected to your LAN. For example, if you have a music studio with small number personal computers connected via MIDI interfaces and MIDI cables, ipMIDI will replace them all. Any MIDI application on the LAN can communicate with any other without any new physical connections, eliminating separate MIDI cables and additional hardware interfaces and if you are running a wireless IP network you dont need any cables at all! Ease-of-use with MIDI Multicast. ipMIDI sends MIDI data over Multicast UDP, not TCP. Its very easy to use. Select Ethernet Midi in your audio Application. Thats all, no configuration, no client - server hassle. You will not have to define a sender or a receiver. nominate an ethernet MIDI OUT port for your sending application. Now every single application on your network can receive the data by opening an ethernet MIDI IN port, simultaneously. A near to zero latency and up to 1 Gbit/s. ipMIDI is a native Windows WDM kernel mode driver. Expect a latency < 0.5 msec, lower than when using legacy equipment and real MIDI cables. A standard MIDI interface sends with a data rate of 31.2 kbaud, which has limitations. For example, sending excessive Polyphonic-Aftertouch MIDI messages easily breaks this limit. With ipMIDI this limit is defined by your network data rate. Think of the amazing possibilities to work with your network rate of 10Mb, 100Mb or 1Gbit/s. ipMIDI provides up to 20 Ethernet MIDI IN Ports and 20 Ethernet MIDI OUT Ports - Adjustable. In the ipMIDI network, because all MIDI is transmitted over a single port could be received by every personal computer, ipMIDI replaces more than 20 MIDI cables, establishing an n-way MIDI network. The numbers of ports are adjustable. Select only the number you need and only those will be installed on your system and be visible in your audio program.