ClockGen

The ClockGen series consists in a set of overclocking programs, each of them being dedicated to one or several mainboards.ClockGen does not need to be installed. Just unzip all files in the same directory and run ClockGen.exe. Your ClockGen settings will be saved in a file named clockgen.ini stored in your temporary account path (typically : C:Documents and SettingsUserNameLocal SettingsTemp). If you want to remove this file from your system, run clockgen with the following parameter : ClockGen.exe -u

The main window shows available functions on your system, therefore the layout may depend on your system specifications. If ClockGen is able to find a clock generator on your system, the buttons "PLL Control" and PLL Setup are present.

You first have to select the clock generator (PLL), so click on PLL Setup.In some cases, it will be able to detect the PLL that is used by your system, especially if your mainboard is equipped with an nVidia chipset. In this case, you wont be able to change the PLL model, and you can directly go to the PLL Control step.